Comments on: Initial Report: Motosliders Frame Sliders http://bolty.net/2008/05/22/initial-report-motosliders-frame-sliders/ a blog about riding motorcycles Tue, 08 May 2012 20:28:30 +0000 hourly 1 http://wordpress.org/?v=3.3.2 By: Stacy http://bolty.net/2008/05/22/initial-report-motosliders-frame-sliders/#comment-1199 Stacy Tue, 05 Jan 2010 02:08:37 +0000 http://bolty.net/?p=26#comment-1199 <strong><a href="http://bolty.net/2008/05/22/initial-report-motosliders-frame-sliders/#comment-1198" rel="nofollow">@Stephen</a>:</strong> The slider spools are "keyed" -- one fits into a wider recess on the left side and the other fits into a smaller diameter recess on the right side. I measured my sliders and the left side measures 4 1/4" while the right measures 4 3/16". The nylon lock nuts are new to me. It's likely they are a new change to the kit. I suggest following the instructions included with your sliders and not using Loctite if it isn't mentioned. @Stephen: The slider spools are “keyed” — one fits into a wider recess on the left side and the other fits into a smaller diameter recess on the right side. I measured my sliders and the left side measures 4 1/4″ while the right measures 4 3/16″.

The nylon lock nuts are new to me. It’s likely they are a new change to the kit. I suggest following the instructions included with your sliders and not using Loctite if it isn’t mentioned.

]]> By: Stephen http://bolty.net/2008/05/22/initial-report-motosliders-frame-sliders/#comment-1198 Stephen Tue, 05 Jan 2010 01:05:37 +0000 http://bolty.net/?p=26#comment-1198 I bought them after reading your recommendation and those on SVRider. When I installed mine, the right side sat deeper in the frame than the left side so that the right one measured ~4" from edge to frame and the left ~4 1/4". How did your set fit? Mine also came with nylon lock nuts and didn't reference using loctite as in your instructions. I bought them after reading your recommendation and those on SVRider. When I installed mine, the right side sat deeper in the frame than the left side so that the right one measured ~4″ from edge to frame and the left ~4 1/4″. How did your set fit? Mine also came with nylon lock nuts and didn’t reference using loctite as in your instructions.

]]> By: Motosliders Instructions for SV650, SV1000, V-Strom — bolty.net http://bolty.net/2008/05/22/initial-report-motosliders-frame-sliders/#comment-568 Motosliders Instructions for SV650, SV1000, V-Strom — bolty.net Sat, 11 Apr 2009 03:00:59 +0000 http://bolty.net/?p=26#comment-568 [...] more about Motosliders, see Initial Report: Motosliders Frame Sliders Related Posts:Initial Report: Motosliders Frame Sliders I never considered myself much of a modder. [...] [...] more about Motosliders, see Initial Report: Motosliders Frame Sliders Related Posts:Initial Report: Motosliders Frame Sliders I never considered myself much of a modder. [...]

]]>